It is suitable for measuring tension, compression, three-point bending, four-point bending, shearing, tearing, peeling, finished shoe puncture, carton pressure holding, foam cycle compression, spring tension and compression and various dynamic and static cycle tests. It can also conduct tests and provide data according to international standards such as GB, ISO, DIN, ASTM, JS, etc.

The skid resistance tester not only controls the machine and processes the data collected during the test, but also ensures that the entire procedure is precisely controlled in strict accordance with the parameters required by the test standard. A feature of the tester and software is its self-learning mode that can be run during each test. The vertical load is monitored during each test and adjusted when necessary for subsequent tests, ensuring that the vertical load is correct each time.

Shoe wear tester is suitable for testing the wear resistance of finished shoe soles and molded soles (sheets). By measuring the length of the wear marks after the sample is worn, its wear resistance is evaluated. It can meet the test of samples of different sizes or parts.

This machine can quickly detect whether rubber shoes and shoe liners are waterproof. This machine can be placed on the production line to perform full inspection on the products to fully control the waterproof quality of the products. During the test, the machine uses air pressure to clamp the seal and the clamp to bring the test piece into deep water. At the same time, it is filled with air at a constant pressure. As long as the test piece leaks water, bubbles will be generated immediately. When the set test seconds are reached, the clamp will automatically float the test piece to the surface.