The electric rolling roller is used to prepare test specimens for adhesive tape peel strength, holding strength and other tests. The tape specimen is evenly adhered to the standard test substrate at a fixed pressure and speed for test of specimen peel strength or holding strength. Before testing the adhesive strength and holding strength of adhesive tape, a certain force must be applied to make the adhesive and the substrate fit together so that the correct test can be performed under the same conditions.

Product details:

Operation method:

1. Place the steel plate on the machine, stick the tape on one end of the steel plate, and the other end can support the fixed edge of the test slot.

2. Turn on the power switch, press the start button, and the pressure wheel will automatically roll from one end of the tape to the other end at a constant speed.

3. When reaching the other end, the pressure wheel will automatically return, and stop automatically after the pressure wheel goes back and forth three times, and then press the reset button to return to zero. Or wait for the pressure wheel to go out of the test steel plate and press the stop button. One rolling back and forth action is completed. (The instrument stops by default after three back and forth).

4. Repeat the operation according to the test needs.

Technical parameters: