- Product Details
Product Overview:
The packaging drop tester is used to test the degree of damage of various products after free fall after packaging. It can test the diamonds, corners and surfaces of the packaging container, and evaluate the impact resistance of electronic components when they are dropped during transportation. It is mainly used to assess the ability of product packaging to withstand drops during transportation and loading and unloading, so as to improve and perfect the packaging design.
Standards met:
GB/T4857.5-92 ISO2248-1985(E) GB/T2423.8 IEC68-2-27, etc.
Applicable industries:
Suitable for various factories, enterprises, technical supervision departments, commodity inspection agencies, scientific research institutes, colleges and universities, etc. Ideal testing and research equipment
Technical parameters:
Model | HZ-6002B |
Test height | 40~150cm |
Maximum weight of specimen | 60Kg |
Maximum size of specimen | 600*600*600mm |
Single arm support length | 42 cm |
Vertical acceleration value of the center of the pallet | 2g |
Parallel error between the pallet and the impact panel | 2° |
Angle error between the falling surface of the package and the horizontal during the falling process | 2° |
Drop error | ±5mm |
Drop height | Lift the package in the predetermined state, and the error between the lifting height and the predetermined drop height shall not exceed ±2% of the predetermined height or 5mm (whichever is greater). |
Support device | The device supporting the test sample should be able to keep the test sample in the required predetermined state before release |
Release device | During the release of the test sample, the test sample should not touch any part of the device to ensure its free fall |
Falling plane error | 〈1° |
Power supply | 1∮220V |
Machine size | 1570×1100×2350 mm(长×宽×高) |
Machine weight | 200 kg |
